Manufacturability of Chicken Coop Door and Feed

Question: Discuss about theManufacturability of Chicken Coop Door and Feed. Answer: Introduction The chicken coop door and feed was manufactured using local materials in order to achieve its economic value. The materials used were key to ensure that it was a low cost solution with effective technology. In addition, the coop and door involved the solar technology to control the functionality of the different parts of its system. In addition, the solar technology involved simple principles which were meant to control the feeder and the opening and closing of the door. In addition, the whole system involves a resting area for the chicken and the feeding area. This means that this solar system has to control the movement of the chicken between these two major areas. The materials used include the mineral felt roof, cooper frame which was made from timber, galvanised wire, a container for the feeding and water, PVC pipes, and stainless steel. In addition, the system involves the solar panel which was placed on top of the house to control the functionality of the different aspects of the coop and door. The whole system involves a framed structure which enhances the placement of the cooper frame. The solar system was available to control the movement of the chicken in and out. This has to be noted it an automatic system, whereby the time control is used to control the opening of the door. Additionally, the mineral felt roof was placed on the framed structure. The roof was a pitched one and the solar panel placed on top. The solar panel was then wired to the Cooper door and the chicken feed to enhance the control of their systematic functioning. Additionally, the framed structure was made from timber which is available. This enhanced the control of the cost of the structure and whole system to enhance its economical factor. Additionally, galvanized wire was used to separate the two systems of the chicken. This was meant to enhance the feeding and resting of the chicken. The systematic location of the areas and use or the wire enhances the allowance on the lighting system. The PVC pipes were connected from the containers containing the food and water to the chicken feeder. The system had to automatically detect the water and food status and then allow any addition. The feeder is wired to the solar system and detect a certain level of the two components and then add more when the level is less. In addition, the stainless steel was uses to enhance the durability of the structure. The outer frame was made from stainless steel and raises the two parts of the chicken house. The system contains the steel to enhance the functionality and economic status of the chicken house. The four corners of the house contained the stainless steel to enhance the stability of this structure. The system only allows inspection of the functionality at the critical times. The system automatically controls the feeding and movement of the chicken and therefore enhances the supervision of the system. The manufacturability of the system was meant to ensure economical factors and the effectiveness to achieve the purpose of the system.